Dig-it B4RK1100 5-6t Excavator 1100mm Sieve Rake Bucket

Dig-it Sieve Rake buckets are designed with a multi radius bum profile to allow for increased volume and breakout force while reducing wear on the rear bum of the bucket by lifting it slightly out of the wear path.

It's unique width is designed to easily fit with your  mud or batter bucket for easy transport.

These sieve sorting buckets have the same profile as our batter or mud bucket for a maximum working width and best volume to suit the machine weight.

The Vertical tynes are profile cut from thick plate while the horizontal tynes are round bar, reducing the chance of rocks being wedged into the gaps.

The cutting edge is hardened 400 grade ready for use as a gummy bucket. It is profile cut with webbing around the tynes to reduce the chance of cracking.

The optional bolted teeth and side cutters are quickly removable if you require a gummy bucket, saving the need to purchase a 2nd bucket.

A bolt on edge is optional for use in high wear conditions, but not required. Bolt on edge can't be used at the same time as teeth.

Bucket sizes, dimensions and technical information can be found in the second photo. hook ups to suit non standard sizes or configurations may not be available or attract addition cost.

This bucket may fit any mini excavator, digger, mini digger, digga 4.8t 5t 5.3t 5.5t 5.7t 5.8t 6t 6.5t 7t 8t 8.5t 9t 10t including Airman, Bobcat, Case, Cat, Caterpillar, Doosan, Eurocomach, Hitachi, Hyundai, IHI, JCB, John Deere, Kato, Kobelco, Komtasu, Kubota, Liebherr, Nagano, New Holland, Sany, Sumitomo, Sunward, Takeuchi, Terex, Volvo, Wacker Neuson, Yanmar and more.